How To Reset Tire Pressure Sensor Ram 1500. Drive for [email protected] 50 mph or more. When the tire pressure light flashes 3x, release the reset button.
Drive the vehicle above 15 mph for at least 10 minutes. Inflate all tires to pressure listed on the placard. To reset the tpms to the 2019 ram 1500 turn on the ignition before starting the vehicle click and hold down the tpms reset button;
If The Fault Follows, Its A Sensor Issue (Sensors Are Easy To Break).
Drive for 10mins @ 50mph or higher. When the tire pressure light blinks 3x’s release the reset button. If the sensor is not working correctly then you may have tires with.
In Some Cases You May Need To Hold The Button Down Till The Light Flashes.
Start the engine and let it go for about 20 minutes. The vehicle will learn each sensor id and turn the tpms light off. Let the vehicle sit off for a minimum of 20 minutes.
When The Tire Pressure Light Flashes 3X, Release The Reset Button.
If the tpms light comes on after this step, the sensor requires replacement. Inflate all tires to pressure listed on the placard. Enter a highway and drive.
Drive For [email protected] 50 Mph Or More.
Could be ice in the tire or corrosion, nitrogen is the best idea, the stability has more to do with the dryness and that it is a noble gas, as all gasses expand and contract as temperatures change and the o2 will migrate through the rubber when using regular compressed air. The ram 1500 uses a direct tpms system. If the light remains on after adjusting the air pressure then the problem lies at one of the individual sensors located at the valve stems on the rims.
Drive [email protected] 50 Mph Or More.
Press and hold the tpms reset button. Preferably set the cruise control to assure this speed. You just performed a hard reset on the car.